manualshive.com logo in svg

HP Fabric OS v7.0.1, Administrator'S Manual

Share
Download
HP Fabric OS v7.0.1 Administrator'S Manual Download Page 289

Fabric OS Administrator’s Guide

251

53-1002446-01

Zone creation and maintenance

11

Deleting a zone

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the zoneDelete command, using the following syntax:

zonedelete "

zonename

"

3. Enter the cfgSave command to save the change to the defined configuration.

The cfgSave command ends and commits the current zoning transaction buffer to nonvolatile 
memory. If a transaction is open on a different switch in the fabric when this command is run, 
the transaction on the other switch is automatically aborted. A message displays on the other 
switches to indicate that the transaction was aborted.

Example 

switch:admin> 

zonedelete "bluezone"

 

switch:admin> 

cfgsave

 

You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled. Until the Effective
configuration is re-enabled, merging new switches into the 
fabric is not recommended and may cause unpredictable
results with the potential of mismatched Effective Zoning
configurations.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] 

y

Viewing a zone in the defined configuration

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the zoneShow command, using the following syntax: 

zoneshow[--sort] ["

pattern

"] [, 

mode

]

If no parameters are specified, the entire zone database (both the defined and effective 
configuration) is displayed. 

Example 

The following example shows all zones beginning with A, B, or C, in ascending order:

switch:admin> 

zoneshow --sort "[A-C]*"

zone: Blue_zone 1,1; array1; 1,2; array2
zone: Bobs_zone 4,5; 4,6; 4,7; 4,8; 4,9

Validating a zone

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the cfgShow command to view the zone configuration objects you want to validate.

switch:admin> 

cfgShow

Defined configuration:
cfg: USA_cfg Purple_zone; White_zone; Blue_zone
zone: Blue_zone

1,1; array1; 1,2; array2

zone: Purple_zone

Summary of Contents for Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands