manualshive.com logo in svg

HP Fabric OS v7.0.1, Administrator'S Manual

Share
Download
HP Fabric OS v7.0.1 Administrator'S Manual Download Page 264

226

Fabric OS Administrator’s Guide

53-1002446-01

Disabling Virtual Fabrics mode

10

3. Delete all Admin Domains, as described in 

“Deleting all user-defined Admin Domains 

non-disruptively”

 on page 354.

4. Enter the following command to enable VF mode:

fosconfig --enable vf

 

5. Enter y at the prompt.

Example 

The following example checks whether VF mode is enabled or disabled and then enables it.

switch:admin> 

fosconfig --show

FC Routing service:

disabled

iSCSI service:

Service not supported on this Platform

iSNS client service:

Service not supported on this Platform

Virtual Fabric:

disabled

Ethernet Switch Service:

Service not supported on this Platform

switch:admin> 

fosconfig --enable vf

WARNING:

This is a disruptive operation that requires a reboot to take 

effect.
All EX ports will be disabled upon reboot.
Would you like to continue [Y/N] 

y

VF has been enabled. Your system is being rebooted.

Disabling Virtual Fabrics mode

When you disable VF mode, the following occurs:

•

The CPs are rebooted.

•

If F_Port trunking is enabled on ports in the default switch, the F_Port trunking information is 
deleted.

If you want to use Admin Domains in a fabric, you must first disable VF mode.

1. Connect to the physical chassis and log in using an account with the chassis-role permission.

2. Enter the following command to check whether VF mode is disabled:

fosconfig --show

 

3. Move all ports to the default logical switch.

lscfg --config

 

128

 

-slot

 

slot

 

-port

 

port

4. Delete all of the non-default logical switches.

lscfg --delete

 

fabricID

 

5. Enter the following command to disable VF mode:

fosconfig --disable vf

 

6. Enter y at the prompt.

Summary of Contents for Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands