manualshive.com logo in svg

HP Fabric OS v7.0.1, Administrator'S Manual

Share
Download
HP Fabric OS v7.0.1 Administrator'S Manual Download Page 172

134

Fabric OS Administrator’s Guide

53-1002446-01

ACL policy management

7

Example of deleting an ACL policy

switch:admin> 

secpolicydelete "DCC_POLICY_010"

About to delete policy Finance_Policy.
Are you sure (yes, y, no, n):[no] 

y

Finance_Policy has been deleted.

Adding a member to an existing ACL policy

As soon as a policy has been activated, the aspect of the fabric managed by that policy is enforced.

1. Connect to the switch and log in using an account with admin permissions, or an account with 

OM permissions for the Security RBAC class of commands.

2. Enter the secPolicyAdd command.

3. To implement the change immediately, enter the secPolicyActivate command.

Example of adding to an ACL policy

For example, to add a member to the SCC_POLICY using the switch WWN: 

switch:admin>

 secpolicyadd "SCC_POLICY", "12:24:45:10:0a:67:00:40"

Member(s) have been added to SCC_POLICY.

Example of adding members to the DCC policy

To add two devices to the DCC policy, and to attach domain 3 ports 1 and 3 (WWNs of devices 
are 11:22:33:44:55:66:77:aa and 11:22:33:44:55:66:77:bb): 

switch:admin> 

secpolicyadd "DCC_POLICY_abc",

"11:22:33:44:55:66:77:aa;11:22:33:44:55:66:77:bb;3(1,3)"

Removing a member from an ACL policy

As soon as a policy has been activated, the aspect of the fabric managed by that policy is enforced.

1. Connect to the switch and log in using an account with admin permissions, or an account with 

OM permissions for the Security RBAC class of commands.

2. Enter the secPolicyRemove command.

3. To implement the change immediately, enter the secPolicyActivate command.

Example of removing a member

For example, to remove a member that has a WWN of 12:24:45:10:0a:67:00:40 from the 
SCC_POLICY:

switch:admin>

 secpolicyremove "SCC_POLICY", "12:24:45:10:0a:67:00:40"

Member(s) have been removed from SCC_POLICY.

Aborting unsaved policy changes

You can abort all ACL policy changes that have not yet been saved. 

1. Connect to the switch and log in using an account with admin permissions, or an account with 

OM permissions for the Security RBAC class of commands.

2. Enter the secPolicyAbort command.

Summary of Contents for Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands