manualshive.com logo in svg

HP Fabric OS v7.0.1, Administrator'S Manual

Share
Download
HP Fabric OS v7.0.1 Administrator'S Manual Download Page 270

232

Fabric OS Administrator’s Guide

53-1002446-01

Changing the fabric ID of a logical switch

10

Changing the fabric ID of a logical switch

The following procedure describes how you can change the fabric ID of an existing logical switch. 
The fabric ID indicates in which fabric the logical switch participates. By changing the fabric ID, you 
are moving the logical switch from one fabric to another.

Changing the fabric ID requires permission for chassis management operations. You cannot 
change the FID of your own logical switch context. 

NOTE

If you are in the context of the logical switch with the fabric ID you want to change, you are 
automatically logged out when the fabric ID changes. To avoid being logged out, make sure you are 
in the context of a different logical switch from the one with the fabric ID you are changing.

1. Connect to the switch and log in using an account with admin permissions. 

2. Enter the following command to change the fabric ID of a logical switch:

lscfg --change

 

fabricID

 

-newfid

 

newFID

 

3. Enter y at the prompt.

4. Enable the logical switch.

fosexec --fid 

newFID

 -cmd "switchenable"

Example of changing the fabric ID on the logical switch from 5 to 7

sw0:FID128:admin> 

lscfg --change 5 -newfid 7

Changing of a switch fid requires that the switch be disabled.
Would you like to continue [y/n]?: 

y

Disabling switch...
All active login sessions for FID 5 have been terminated.
Checking and logging message: fid = 5.
Please enable your switch.
sw0:FID128:admin> 

fosexec --fid 7 -cmd "switchenable"

---------------------------------------------------

"switchenable" on FID 7:

Changing a logical switch to a base switch

1. Connect to the switch and log in using an account with the chassis-role permission.

2. Set the context to the logical switch you want to change, if you are not already in that context.

setcontext

 

fabricID

 

where 

fabricID

 is the fabric ID of the logical switch you want to change to a base switch.

3. Configure the switch to 

not

 allow XISL use, as described in 

“Configuring a logical switch to use 

XISLs”

 on page 234.

4. Enter the following command to change the logical switch to a base switch:

lscfg --change

 

fabricID

 

-base

 

The 

fabricID

 parameter is the fabric ID of the logical switch with the attributes you want to 

change.

Summary of Contents for Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands