manualshive.com logo in svg

HP Fabric OS v7.0.1, Administrator'S Manual

Share
Download
HP Fabric OS v7.0.1 Administrator'S Manual Download Page 420

382

Fabric OS Administrator’s Guide

53-1002446-01

Temporary licenses

18

Date change restriction

Once the temporary license is installed, you cannot change the time of the switch until the 
temporary license is removed. To change the time, you must remove the license, change the date, 
and then re-install the license on the switch. However, if there is any other mechanism that exists to 
change the time, such as NTP, then it is not blocked. If you are using NTP to synchronize the time 
between your network devices, including switches or Backbones, then do not attempt to change 
the system date and time when a temporary license is installed.

Configupload and download considerations

The configDownload and configUpload commands download the legacy, enhanced, consumed 
capacities, and temporary licenses.

Expired licenses

Once a temporary license has expired, you can view it through the licenseShow command. Expired 
licenses have an output string of “License has expired”. RASlog warning messages are generated 
every hour for licenses present in the database which have expired or are going to expire in the next 
five days. An expired license may become unusable after a reboot, failover, firmware download, or a 
port or switch disable or enable operation.

Removing an expired license

CAUTION

The following procedure is disruptive to the switch.

1. Connect to the switch and log in using an account with admin permissions. 

2. Enter the reboot command for the expiry to take affect.

Universal temporary licenses

Universal temporary license keys include a duration period. Once installed on a switch, an 
expiration date is calculated and the duration is decremented until there is no remaining time, at 
which point it is expired. Because of this, universal temporary licenses should not be installed on a 
switch until you are ready to use or test the feature, so as not to unnecessarily consume a portion 
of the temporary-use duration.

The expiration date is based on the system time at the installation of the license plus the number 
of days for which the universal temporary license is valid. Universal temporary licenses cannot be 
removed and reinstalled on the same switch.

Universal temporary licenses are always retained in the license database on the product even 
though they can be explicitly deleted from any user interface.

Summary of Contents for Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands