![HP Fabric OS v7.0.1 Administrator'S Manual Download Page 196](http://html.mh-extra.com/html/hp/fabric-os-v7-0-1/fabric-os-v7-0-1_administrators-manual_165056196.webp)
158
Fabric OS Administrator’s Guide
53-1002446-01
IP Filter policy
7
Default policy rules
A switch with Fabric OS v6.2.0 or later will have a default IP Filter policy for IPv4 and IPv6. The
default IP Filter policy cannot be deleted or changed. When an alternative IP Filter policy is
activated, the default IP Filter policy becomes deactivated.
Table 36
lists the rules of the default IP
Filter policy.
IP Filter policy enforcement
An active IP Filter policy is a filter applied to the IP packets through the management interface. IPv4
management traffic passes through the active IPv4 filter policy, and IPv6 management traffic
passes through the active IPv6 filter policy. The IP Filter policy applies to the incoming (ingress)
management traffic only. When a packet arrives, it is compared against each rule, starting from the
first rule. If a match is found for the source address, destination port, and protocol, the
corresponding action for this rule is taken, and the subsequent rules in this policy are ignored. If
there is no match, then it is compared to the next rule in the policy. This process continues until the
incoming packet is compared to all rules in the active policy.
If none of the rules in the policy matches the incoming packet, the two implicit rules are matched to
the incoming packet. If the rules still do not match the packet, the default action, which is to deny,
is taken.
When the IPv4 or IPv6 address for the management interface of a switch is changed through the
ipAddrSet command or manageability tools, the active IP Filter policies automatically become
enforced on the management IP interface with the changed IP address.
NOTE
If a switch is part of a LAN behind a Network Address Translation (NAT) server, depending on the NAT
server configuration, the source address in an IP Filter rule may have to be the NAT server address.
TABLE 36
Default IP policy rules
Rule number
Source address
Destination port
Protocol
Action
1
Any
22
TCP
Permit
2
Any
23
TCP
Permit
3
Any
897
TCP
Permit
4
Any
898
TCP
Permit
5
Any
111
TCP
Permit
6
Any
80
TCP
Permit
7
Any
443
TCP
Permit
8
Any
161
UDP
Permit
9
Any
111
UDP
Permit
10
Any
123
UDP
Permit
11
Any
600-1023
TCP
Permit
12
Any
600-1023
UDP
Permit
Summary of Contents for Fabric OS v7.0.1
