manualshive.com logo in svg

HP Fabric OS v7.0.1, Administrator'S Manual

Share
Download
HP Fabric OS v7.0.1 Administrator'S Manual Download Page 92

54

Fabric OS Administrator’s Guide

53-1002446-01

Equipment status

3

Equipment status

You can check the status of switch operation, High Availability features, and fabric connectivity.

Checking switch operation

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the switchShow command. This command displays a switch summary and a port 

summary. 

3. Check that the switch and ports are online. 

4. Use the switchStatusShow command to further check the status of the switch.

Verifying High Availability features (Backbones only)

High Availability (HA) features provide maximum reliability and nondisruptive management of key 
hardware and software modules. 

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the chassisShow command to verify the model of the DCX and obtain a listing of all 

field-replaceable units (FRUs).

3. Enter the haShow command to verify HA is enabled, the heartbeat is up, and that the HA state 

is synchronized between the active and standby CP blades.

4. Enter the fanShow command to display the current status and speed of each fan in the system. 

Refer to the hardware reference manual of your system to determine the appropriate values.

5. Enter the psShow command to display the current status of the switch power supplies. Refer to 

the hardware reference manual of your system to determine the appropriate values.

6. Enter the slotShow -m command to display the inventory and the current status of each slot in 

the system.

Example of the slot information displayed for a DCX chassis

DCX:FID128:admin> 

slotshow -m

Slot   Blade Type     ID    Model Name     Status
--------------------------------------------------
  1     SW BLADE     55     FC8-32         ENABLED
  2     SW BLADE     51     FC8-48         ENABLED
  3     SW BLADE     39     FC10-6         ENABLED
  4     SW BLADE     51     FC8-48         ENABLED
  5     CORE BLADE   52     CORE8          ENABLED
  6     CP BLADE     50     CP8            ENABLED
  7     CP BLADE     50     CP8            ENABLED
  8     CORE BLADE   52     CORE8          ENABLED
  9     SW BLADE     37     FC8-16         ENABLED
 10     AP BLADE     43     FS8-18         ENABLED
 11     SW BLADE     55     FC8-32         ENABLED
 12     AP BLADE     24     FR4-18i        ENABLED 

Summary of Contents for Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands