manualshive.com logo in svg

HP Fabric OS v7.0.1, Administrator'S Manual

Share
Download
HP Fabric OS v7.0.1 Administrator'S Manual Download Page 178

140

Fabric OS Administrator’s Guide

53-1002446-01

DCC policies

7

1. Connect to the switch and log in using an account with admin permissions, or an account with 

OM permissions for the Security RBAC class of commands.

2. Enter the secPolicyCreate “DCC_POLICY_

nnn

” command.

DCC_POLICY_

nnn 

is the name of the DCC policy; 

nnn

 is a string consisting of up to 19 

alphanumeric or underscore characters to differentiate it from any other DCC policies.

3. To save or activate the new policy, enter the appropriate command:

•

To save the policy, enter the secPolicySave command.

•

To save and activate the policy, enter the secPolicyActivate command.

If neither of these commands is entered, the changes are lost when the session is logged out. 

Example of creating DCC policies

To create the DCC policy “DCC_POLICY_server” that includes device 11:22:33:44:55:66:77:aa 
and port 1 and port 3 of switch domain 1: 

switch:admin> 

secpolicycreate 

"DCC_POLICY_server","11:22:33:44:55:66:77:aa;1(1,3)"

DCC_POLICY_

server

 has been created

To create the DCC policy “DCC_POLICY_storage” that includes device port WWN 
22:33:44:55:66:77:11:bb, all ports of switch domain 2, and all currently connected devices of 
switch domain 2:

switch:admin> 

secpolicycreate "DCC_POLICY_storage", 

"22:33:44:55:66:77:11:bb;2[*]"

DCC_POLICY_

storage

 has been created

To create the DCC policy “DCC_POLICY_abc” that includes device 33:44:55:66:77:11:22:cc 
and ports 1 through 6 and port 9 of switch domain 3:

switch:admin>

 secpolicycreate "DCC_POLICY_abc", 

"33:44:55:66:77:11:22:cc;3(1-6,9)"

DCC_POLICY_

abc

 has been created

To create the DCC policy “DCC_POLICY_example” that includes devices 
44:55:66:77:22:33:44:dd and 33:44:55:66:77:11:22:cc, ports 1 through 4 of switch domain 
4, and all devices currently connected to ports 1 through 4 of switch domain 4: 

switch:admin> 

secpolicycreate "DCC_POLICY_example", 

"44:55:66:77:22:33:44:dd;33:44:55:66:77:11:22:cc;4[1-4]"

DCC_POLICY_

example

 has been created

Deleting a DCC policy

1. Connect to the switch and log in using an account with admin permissions, or an account with 

OM permissions for the Security RBAC class of commands.

2. Enter the secPolicyDelete command.

Example  of deleting stale DCC policies

switch:admin> 

secpolicydelete ALL_STALE_DCC_POLICY

 

About to clear all STALE DCC policies
ARE YOU SURE  (yes, y, no, n): [no] 

y

Summary of Contents for Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands