Honda TRX400EX FOURTRAX 1999, Service Manual

Page: 169 / 263

-three bolts and brake disc
-
side collars
- dust seals.
-
cotter pin
-
hub nut
- wheel
IT
DUST SE
Turn the inner race
of
each bearing with your finger.
The bearings should turn smoothly and quietly. Also
check that the bearing outer race fits tightly in the
hub.
Remove and discard the bearings if the races do not
turn smoothly and quietly or i f they fit loosely in the
hub.
FRONT
12-7
Replace
the
bearings in
pairs.
Install the bearing remover head into the bearing.
From opposite side, install the bearing remover shaft
and drive the bearing out of the wheel hub.
Remove the distance collar and drive out the other
bearing.
TOOLS
Bearing remover shaft 07746 -0050100
Bearing remover head, 15
mm
07746
-
0050400
NOTE
Replace the wheel bearings in pairs.
Do
not reuse old
bearings.