Honda TRX400EX FOURTRAX 1999, Service Manual

Page: 196 / 263

REAR
Press the mark-
ing side
of
the
bearing
Note the installa-
tion of the pivot
bolts. All bolts
are installed
from
the right
side.
Apply grease to new needle bearing rollers.
Carefully press the needle bearing into the shock arm
and shock link until the depth from the outer surface
is
5.5 m m (0.22 in).
TOOLS:
Driver
-
0010000
Attachment, 24
x
26 m m 07746-0010700
Pilot, m m 07746-0040400
PILOT
Make sure that the needle rollers are in position.
Apply grease to new dust seal lips and install them
into the pivots until they are seated against the nee-
dle bearings.
Install the pivot collars.
INSTALLATION
Install the shock arm into the frame with the "UP"
mark facing up and the bolt and nut.
install the shock link over the shock arm and into the
with the washer (left side of the shock
link), bolts and nuts.
Connect the shock absorber to the shock link with the
bolt and nut.
Tighten the linkage and shock absorber mounting nuts.
TORQUE:
Shock arm-to-frame: 59 43
Shock arm-to-shock l i n k
Shock link-to-swingarm:
Shock absorber mounting:
59 (6.0 43
44 14.5
33
59 43
ARM
13-1
2