GSK 988T, User Manual

Page: 404 / 416

GSK988T Turning CNC system User Manual
390
Appendix
K13.1 If the chuck function is valid, check the chuck clamping state
when the spindle is started (1: Yes, 0: No)
1
K13.2 Tailstock control function (1: valid, 0: invalid) 0
K13.4 Spindle gear stage is stored when power-off (1: Yes, 0: No) 1
K13.5 Spindle automatic gear change in-position signal active level
(1: low-level, 0: high-level)
0
K13.6 Check spindle automatic gear change in-position signal (1:
Yes, 0: No)
0
K13.7 Spindle automatic gear change function (1: valid, 0: invalid) 0
K14.0 Check chuck clamping/unclamping signal (1:Yes, 0: No) 0
K14.2 Chuck mode (1: inner chuck, 0: outer chuck) 0
K14.4 Low-pressure alarm signal level
(1: low-level alarm, 0: high-level alarm)
0
K14.5 Low-pressure alarm function (1: valid, 0: invalid) 0
K14.6 Protection door input signal alarm level
(1: low-level alarm, 0: high-level alarm)
0
K14.7 Protection door alarm function (1: valid, 0: invalid) 0
K15.0 Starting up operation mode MD1 0
K15.1 Starting up operation mode MD2 0
K15.2 Starting up operation mode MD4 0
K15.4 Starting up operation mode (1: MD2, MD2, MD4, 0: the mode
when power-off the last time)
0
K15.6 Servo spindle 8-point orientation function (1: valid, 0: invalid) 0
2.3.2 Parameter DT
DT
address
PLC initial
value
Minimum
input value
Maximum
input value
Meaning
DT0000 1000 0 60000 Spindle gear change time 1 (ms)
DT0001 1000 0 60000 Spindle gear change time 2 (ms)
DT0002 3000 0 60000 Low-pressure alarm detection time (ms)
DT0003 5000 100 5000 Tool change (for one tool position) time
upper limit (ms)
DT0004 15000 1000 60000 Tool change (for maximum tool positions)
time upper limit (ms)
DT0005 500 100 5000 M code execution duration (ms)
DT0006 500 100 5000 S code execution duration (ms)
DT0007 500 0 4000 Delay time of the tool post from forward
rotation stop to reverse rotation output
(ms)
DT0008 500 0 4000 Alarm time when the TCP signal is not
received (ms)
DT0009 1000 0 4000 Tool post reverse rotation lock time (ms)
DT0010 0 0 10000 Delay time of M05 and spindle braking
output (ms)