GSK 988T, User Manual

Page: 298 / 416

GSK988T Turning CNC System User Manual
284
Ⅱ
Operation
Fig.7-3
（ 4 ） Input “the coordinate axis axis value” to be measured in ,
press or for in-position measuring;
（
5
）
Calculating the offset value:
If the cursor is in the tool offset box, the tool wearing value is cleared, the tool offset value = the
relative coordinate value – the input coordinate value;
If the cursor is in the tool wearing box, the tool wearing value remains unchanged, the tool offset
value = the relative coordinate value — the input coordinate value — the wearing value relative to the
coordinate axis.
Note: The lathe tool-setting isn’t with the tool compensation value.
7.1.3 +input mode
（
1
）
On the setting tool offset window, press to access the tool offset management
window;
（
2
）
Press or to select the window, and press or to select the
tool offset number to be rewritten, and press or to select the axial tool offset Value or
the wearing value to be rewritten;
（
3
）
Press , the selected tool offset value or the wearing value adds up one input value,
which is shown as below: