GSK 988T, User Manual

Page: 350 / 416

GSK988T Turning CNC system User Manual
336
Ⅱ
Operation
0: Control returns to the head of the program.
1: Control does not return to the head of the program.
#5 M02 When M02 is executed in automatic operation
0:Control returns to the head of the program.
1:Control does not return to the head of the program.
#6 EOR When an end-of-record mark(%) is read during program execution
0: Alarm occurs
1: No alarm occurs
#7 M3B The number of M codes that can be specified in one block
0: 1
1: Up to 3
3410 Tolerance of arc radius(CRE)
『
Modification authority
』
: Equipment management authority
『 Value Range 』 : 0 ～ 9999 9999
『
Default Setting
』
: 0
Setting unit
IS
－
B IS
－
C
Unit
Input in mm 0.001 0.0001 mm
Inch input 0.0001 0.00001 inch
Set the allowable error value of arc interpolation (G02, G03) starting point radius and its finishing
point radius. P/S alarms when arc interpolation radius error is more than the limit value.
Note:
When the setting value is 0, it doesn’t require checking the arc radius error.
11.12 Parameters Related to Screw Pitch Error Compensation
3620 Number of the pitch error compensation position for reference
position(NPR)for each axis
『
Way of Validating
』
: After power-on
『 Parameter Type 』 : Word axis
『
Value Range
』
: 0
～
1023
『
Default Setting
』
: 0
3621 Number of pitch error compensation position at extremely
negative position (NEN)for each axis
『
Way of Validating
』
: After power-on
『
Parameter Type
』
: Word axis
『
Value Range
』
: 0
～
1023
『
Default Setting
』
: 0
The parameter sets the number of the furthest screw pitch error compensation point for each axis in
negative direction.
3622 Number of pitch error compensation position at extremely
positive position (NEP)
『 Way of Validating 』 : After power-on