GSK 988T, User Manual

Page: 255 / 416

Chapter
Ⅲ
Windows
241
Ⅱ
Operation
differed through the alarm number. Press and to scroll the list line by line, or press
and to scroll the list page by page.
When PLC alarms or prompts, display message of address A in black; When CNC alarms or
reminds, the reasons and trouble shooting is shown as black below the message line.
Cancel alarm: Press to cancel all alarms.
Note 1: When PLC alarms or reminds, the message of address A displays in green below the message line;
Note 2: When CNC alarms or reminds, the reason and the trouble shooting display in green below the
message line.
Note 3: Alarms of #0——1000 are CNC, alarms of #1000——2000 are PLC, after #2000, it is prompt message.
Note 4: After the parameter is rewritten, which becomes valid after power on, the alarm can be cleared after
power on again.
Note 5: The detailed alarm message and PLC alarm are referred to
Appendix I Alarm Message List and
Appendix II PLC Alarm
.
3.5.2 Alarm record check window
Press to access the message window, and then press to access the record
window. The latest alarm message is recorded on the window, including the alarm date, time, number
and content. And check the alarm message through pressing , , and . The
window is shown as below:
Fig.3-48
Clear the alarm record: On the record window, press to clear all records of alarms
and remind message, and the window is blank after clearing.
Note: Whether clear the alarm record, which is set by parameter 3110.2.