GSK 988T, User Manual

Page: 382 / 416

GSK988T Turning CNC system User Manual
368
Appendix
No. Message Contents
allowance along Z axis, referring to para.5102#1 MRC.
Modify the program."
139
Start point was on cutting
path in G71~G73 Start point was on cutting path in G71~G73, which may
cause interfere of tool and workpiece, referring to para.
5104#2 FCK. Modify the program.
141
Direction of chamfering and
finishing allowance along X
axis is inconsistent in G73 Direction of chamfering and finishing allowance along X
axis is inconsistent in G73.\nModify the program.
142
Direction of chamfering and
finishing allowance along Z
axis is inconsistent in G73 Direction of chamfering and finishing allowance along
Z axis is inconsistent in G73.\nModify the program.
143
Finishing allowance in
G70~G73 out of range Finishing allowance in G70~G73 is out of range. Modify
the program.
144
G00 or G01 move command
not found in first block of
G71~G72 G00 or G01 move command should include in first
block of G71~G72.\nModify the program.
145
G00-G03 move command
not found in first block of
G73 G00-G03 move command not found in first block of
G73.\nModify the program.
146
X axis motion in the first
block of G71 X axis increment was not commanded in first block of
G71, or X axis increment is zero, or Z axis increment
was commanded. Modify the program.
147
Z axis motion in the first
block of G72 Z axis increment was not commanded in first block of
G72, or Z axis increment is zero, or X axis increment
was commanded. Modify the program.
148
Depth of cutting is less than
zero in G71 or G72 Escaping amount is less than zero in G71 or G72.
Modify the program.
149
Escaping amount is less
than zero in G71 or G72 Escaping amount is less than zero in G71 or G72.
Modify the program.
150
Increment cutting amount
out of range in G73 Increment cutting amount out of range in G73. Modify
the program.
151
The number of division R(d)
in G73 out of range The rounding number of division is less than 1 or more
than 999. Modify the program.
152
Z axis increment not
specified in G74 Z axis increment was not specified in G74. Modify the
program.
153
Number followed address Q
is out of range in G74 Number followed address Q is out of range in G74.
Modify the program.
154
X axis increment not
specified in G74 X axis increment was not specified in G75. Modify the
program.
155
Number followed address P
is out of range in G74 Number followed address P is out of range in G74.
Modify the program.
156
R(e) is less than zero in G74
or G75 Return amount R(e) is less than zero in G74 or G75.
Modify the program.
157
R(
△
d) is less than zero in
G74 or G75
Relief amount of tool at cutting bottom R(
△
d) is less
than zero. Modify the program.