GSK 988T, User Manual

Page: 322 / 416

GSK988T Turning CNC system User Manual
308
Ⅱ
Operation
Fig.10-7
(5) When X axis remains still, the tool is released along Z axis, and the spindle rotation stops, and the
outer dimension of the workpiece is measured (the measured value is 135mm); the system is
switched to the tool offset window, the cursor moves to No.001 offset, is pressed and
the system enters the measure input window, X135 in the input window
is input, and is pressed, and so, X offset value has been input;
(6) Traverse the tool to the safe position, press the tool change key to execute No.2 tool in Manual
mode;
(7) Start the spindle and traverse the tool to the toolsetting point as shown in Fig.10-8, point A;
Fig.10-8
(8) Switch into the tool offset window, the cursor moves to #002 offset, press to
access the measuring window, and input X135 in , and then
press . Use the same method to input Z0 ;
（
9
）
The tool traverses to the safe position, press the tool change key to execute No.3 tool in
Manual mod;
(10) The spindle is started, the tool traverses to the toolsetting point as shown in Fig.10-9, point
A;