90
�
Medicine Dosage Calculation applies the following Formulas:
MC
= Gross ÷ Cubage
(D/m)
= (D/h) ÷ 60
(D/Kg/m)
= (D/m) ÷ Weight
(D/Kg/h0
= (D/h) ÷ Weight
DS
= TS ÷ (Cubage/drop)
Duration
= Gross ÷ (D/h)
�
Items definitions:
MC
: medicine consistency;
(D/m)
: dosage per minute;
(D/h)
: dosage per hour;
(D/Kg/m)
: dosage per kilogram per minute;
DS
: drop speed;
TS
: titration speed
(D/Kg/h
): dosage per kilogram per hour;
Gross
: medicine gross;
Description:
All items in formulas above are consistent with those in the Medicine Calculation Window.
In the Medicine Calculation Window, only “Medicine” and “Weight” are input items, all others are output items.
�
Medicine
: to select a medicine type;
�
Weight
: to set the weight of a patient for calculation, the patient here is not the current patient being mon-
itored right now. The weight can be set from 0.5kg to 300kg. Its interval is 0.5kg. The defaults are 70kg for
Adult, 20kg for Pediatric, 3.0Kkg for Neonate
�
Other output items
: except “Medicine” and “Weight” items, all other items are outputs. Generally, they
are not needed to be adjusted after calculation. However, they can be fine-tuned practically. All other items
results will be updated accordingly when an item fine-tuned.
�
Operation steps
:
1) Select a “Medicine”, e.g. AMINOPHYLLINE;
2) Set a “Weight”, e.g. 70.00 kg;
3) Any change in “Medicine” or “Weight” will cause the system to calculate all output items and display
them on screen automatically.
Because each output item has its own valid range, it will be displayed as “…” when the calculating result
exceeds its range.
�
Medicine
: select one of the medicines: AMINOPHYLLINE, DOBUTAMINE, DOPAMINE, EPINEPHERINE,
HEPARIN, ISUPREL, LIDOCAINE, NIPREL, NITROGLYCERIN and PITOCIN. The default is AMINOPHYL-
LINE.
�
Weight: when entering into medicine calculating window, the operator should enter patient’s weight; the
weight is used for MC calculation only; weight: 0.5Kg to 300Kg selectable; step: 0.5Kg; default: 70 Kg for
adult; 20Kg for pediatric; 3.0 Kg for neonate.
The medicine applies the fixed unit, or a fixed family of units. The operator must select the appropriate unit
according to doctor’s advices. In a unit family, the carry between 2 adjacent units performs automatically
along with the current inputs. When the space on screen for an item is not enough to display all digits of the
item in a certain unit, it will be displayed as “…”.
In neonate mode, “DS” and “Drop” items are ignored.
Note: the patient here has nothing to do with the current patient monitoring right now, and only for Medicine
Calculation.
Titration
:
When the concentration calculation of a medicine is OK in the first tab, the Titration Table in the second tab
(“Titration”) can be browsed. The Titration is a “Dose - Drop Speed” or a “Dose - Titration Speed” cross-ref-
erence list.
Summary of Contents for 35145
