Gima 35145, User Manual

Page: 162 / 268

26
Generally, in general view screen, there are 3 to 7 traces of waveforms in the waveform area, and 2 to 7 param-
eter panels in the parameter area. Each waveform trace shows specific signal waveform (eg. ECG waveform,
plethysmogram and so on), you can also disable this trace. Each parameter panel shows one or one group of
parameter value and the corresponding status.
Waveform area locates at the left part of screen. The display order of waveforms in a view is configurable. The
default order from up to down is waveform 1, waveform 2, waveform 3, waveform 4, waveform 5... waveform
7 (7 traces at most ).
Parameter panels locate at the right part of screen, the parameter order from up to down is Parameter 1, Pa-
rameter 2, Parameter 3, Parameter 4... Parameter 7 (displays 7 parameter panels at most); the default order is
ECG, SpO
2
, NIBP, RESP, TEMP, IBP1 and IBP2.
You can allocate the positions of the parameter waveforms and panels. The parameters or waveforms whose
positions are not allocated will not be displayed.
If no corresponding parameter or waveform is displayed, you should perform the following inspections:
• Check the connection between the module and lead, cable, sensor, etc..
• Enter the Setup window for the corresponding display configuration.
3.7 Using the Main Menu
To enter the main menu by selecting the “Menu” button, most of the monitor’s operations and settings can be
perform through the main menu.
Menu includes parameters setting and the entrances of other functions, such as ECG, SpO
2
, RESP/CO
2
,
TEMP and NIBP parameters setting, and the setting for optional function (e.g. CO
2
setting, IBP setting, C.O.
setting and CSM setting), “Tourniquet”, “Medicine Calculation”, “Oxygenation”, “Ventilation”, “Renal Func-
tion”, “System Settings”, “Patient information”, “Color Settings” and “Standby” etc..
• Parameters settings window for ECG, SpO
2
, RESP, TEMP and NIBP; If some optional function is configured,
then the monitor will show the corresponding setting window (eg. IBP, C.O. CO
2
and CSM setting window)
automatically on the “Menu” window.
• Functional window for Tourniquet, HEMO. (hemodynamic calculation), Nurse Call, Medicine Dosage Calcu-
lation, Oxygenation calculation, Ventilation calculation, Renal function and Patient Document;
• Device information window for System Settings, Color Settings and System Information.
Note:
some of the above mentioned functions are optional, so your monitor may not cover all functions, please
refer to the monitor in your hand.
3.8 Changing System Settings
This Section covers only general settings, data and time, Network and Printer setting. Parameter settings and
other setting can be referred to in respective sections.
3.8.1 Changing General Settings
Changing Language
1. Select “Menu”

“System Settings”

“General”.
2. In “General” menu, select “Language” and then select the desired language.