Gima 35145, User Manual

Page: 169 / 268

33
�
Parameter Settings:
• Parameter 1 and 2 is fixed to be ECG and SpO
2
respectively, which can not be adjusted. Parameter 3 to 7
can be set as OFF, TEMP, NIBP and RESP and so on.
Note: waveform 1~5 and Parameter 1~5 are corresponding to the waveform 1~5 and Parameter 1~5. Similarly,
in other views, the waveform 1~5 and Parameter 1~5 corresponds to that in View settings window, we will not
cover it later.
5.2.2 Big Font View
1) Description:
In this view, the default 3 waveform channels in the waveform area are ECG waveform, SpO
2
plethysmogram
and RESP waveform. And the default 4 parameter panels in the parameter area are the ECG Panel, SpO
2
Panel, NIBP Panel and RR panel.
2) Big Font View Settings
�
Waveform Settings:
• Wave 1 can be set as any ECG lead, or turn off this channel directly.
• Wave 2 and Wave 3 can be set as OFF, ECG I, ECG II, ECG III, ECG aVR, ECG aVL, ECG aVF, ECG V, SpO
2
,
and RESP (or CO
2
). If “3-lead wires” is selected, then Wave 2 and Wave 3 can be set as SpO
2
, and RESP
(or CO
2
), or set as the current cascaded ECG waveform (e.g. ECGII).
�
Parameter Settings:
• “Param 1”, “Param 2” and “Param 4” can be set as OFF, ECG, SpO
2
, NIBP, TEMP and RESP (or CO
2
) and
so on.
• “Param 3” can be set as ECG, TEMP, NIBP, SpO
2
and RESP (or CO
2
) and so on.
• Cascaded above: select it means all first 3 channels waveform display the waveform set in Waveform 1, and
waveform 2 and waveform 3 are the cascaded waveform of Waveform 1. And at the moment, Wave 2 and
Wave 3 are nonadjustable. The default is deselect it.
• Close all waveforms: select it means the waveform 1 to waveform 3 will not be displayed on the waveform
panel in the big font view, but the information in parameter panel will be displayed.
5.2.3 All ECG Trace view
1) Description:
In this View, all ECG trace waveforms are displayed on screen simultaneously. All 7 traces of ECG waveform
are displayed on the left, and the 5 parameter panels are on the right.
2) All ECG Trace View Settings:
The default 7 waveforms displaying in the view are: ECG I, ECG II, ECG III, ECG aVR, ECG aVL, ECG aVF
and ECG V, waveform 1~7 are nonadjustable. When “3-lead wires” is selected, then it displays the cascaded
waveform, the cascaded waveform is fixed to be “ECG II”, “ECG I” or “ECG III”.
• Parameter 1 and Parameter 2 are nonadjustable, the default settings are ECG and SpO
2
respectively.
• Parameter 3 to Parameter 5 can be set as OFF, TEMP, NIBP, RESP (or CO
2
) and so on.
• All waves: select this item, then all waveforms (including all ECG waveforms and other waveforms) will be
displayed on ECG trace view. The factory default is un-select.
Note:
if your monitor is configured with 12-leads ECG function, then in All ECG Trace View Setting window,
you can select or un-select “Cabrera”. When “Cabrera” is selected, then the waveform sequence of ECG lead
will be aVL, I, aVR, II, aVF, III and V1~V6. When un-select “Cabrera”, then the waveform sequence of ECG lead
will be I, II, III, aVR, aVL, aVF and V1~V6.
5.2.4 NIBP List view
1) Description:
In this View, 4 waveform channels are default to be ECG I, ECG II, ECG III and SpO
2
plethysmogram. Parame-
ter panels in the parameter area are default to ECG, SpO
2
, NIBP, RESP and TEMP. At the same view, the NIBP
list view will be displayed.
2) NIBP List View Settings:
• Waveform 1 can be set as OFF, ECG I, ECG II, ECG III, ECG aVR, ECG aVL, ECG aVF and ECG V.
• Waveform 2 and 3 can be set as OFF, SpO
2
, RESP (or CO
2
).The default is ECG II for Wave 1, SpO
2
for
Waveform 2 and RESP (or CO
2
) for Waveform 3.
• Waveform 4 is nonadjustable, the default is NIBP List.
• Parameter 1 and 2 are nonadjustable, the default is ECG and SpO
2
respectively.
• Parameter 3 ~ 5 can be set as OFF, NIBP, RESP, TEMP, CO
2
and CSM etc.