Gima 35145, User Manual

Page: 152 / 268

16
Note:
1 Refer to the plugin modules in your hand for the detailed function.
2 If the customer purchased the monitor with configuration of “Built-in CSM module”, then your monitor will
have not “Plugin CSM module” (Plug-and-Play CSM module). Therefore, you can disregard the description
about “Plugin CSM module”.
Plugin module identification:
1) When the plugin module is inserted into the slot, it will be sensed and powered immediately. After the pl-
ugin module is installed on the monitor, the monitor can identify the function of that module, and add the
corresponding setting items and functional buttons automatically. The plugin module icon will be displayed
on the upper right of the window, at the same time, the waveform area and parameter area will adjust auto-
matically.
2) The monitor will identify the already installed plugin module automatically when the monitor is started up.
3) Hot plugging is available for the plugin module.
4) There are only 2 slots for the plugin modules, if you insert two same modules into the slots, then one of the
modules will be ignored.
Plugin module installation:
Step 1:
If the user wants to add additional function (e.g. CO
2
monitoring), then insert the plugin module into
the slot (L or R side), please make sure the module is right side up. One “di” sound means the module
is inserted into the monitor, and the indicator on module lights on meaning the plugin module is installed
successfully.
Note:
if the indicator on the module is off, then pull it out and repeat step 1 to reinstall.
Plugin module installing location:
Plugin module
installing location
(The figure is for illustration only, please refer to the monitor in your hand for actual appearance)
Description:
1) --- installing slots for Plugin modules, L or R side.
2) and : the Plugin modules for CO
2
and CSM functions. The indicator indicates the
working status of plugin module, blue light means the plugin module is working normal.