Gima 35145, User Manual

Page: 151 / 268

15
• CSM: this connector can be used as the CSM sensor cable connector (optional).
•
IBP1, IBP2, IBP3, IBP4:
these connectors can be used as the IBP sensor cable connector (optional).
•
C.O.:
this connector can be used as the Cardiac Output sensor cable connector (optional).
• Net: Data cable interface. This function is unavailable for most of the monitors, please refer to the monitor
in your hand.
• : Equipotential grounding terminal.
• : USB data interface. This port is used for data exporting. This function is available for the monitor with
plugin module, please refer to the monitor in your hand.
•
a.c. 100~240V, 50/60Hz:
Mains power supply socket.
•
FUSE 2xT1.0AL:
Fuse holder; fuse specification: T1.0AL/250V
Φ
5x20mm.
• : Nurse call connector. This function is unavailable for most of the monitors, please refer to the monitor
in your hand.
•
MONITOR:
External display output which will be different depending on the configuration. This function is
unavailable for most of the monitors, please refer to the monitor in your hand.
• : Network interface. This function is unavailable for most of the monitors, please refer to the monitor
in your hand.
• : Serial port. Reserved for future use (optional).
• : CSM data export interface (optional).
• : ECG Sync output for defibrillation. Reserved for future use (optional).
NAMEPLATE
• The nameplate includes product name, model, CE mark, and manufacturer information and so on.
BATTERY SLOT
Battery cover: Remove the cover to install or change rechargeable battery. Battery specification:
11.1V /4400mAh.
“TO AVOID BATTERY DAMAGE, ALWAYS REMOVE BATTERY(S) BEFORE SHIPPING OR STORAGE”
PRINTER (OPTIONAL)
• “

”—— printer indicator. One indicator labeled “POWER” will be on (in green) when the printer is normal
powered on, otherwise, it will be off. Another indicator labeled “ERROR” will be on (in red) when the printer is
malfunction.
2.3 Plugin Modules (For Plugin monitor only)
This monitor is designed with two slots for the plugin modules which can be inserted in any slot, please insert
the corresponding Plugin module according to your monitoring needs. As shown in below figure, the provided
plugin module has the function to measure one or one group of parameters, for example, CO
2
module and
CSM module. The plugin modules can work immediately after inserting.
Plugin modules (Illustration)
Plugin
module
Plugin
module