Gima 35145, User Manual

Page: 168 / 268

32
then press “View Setting key” to enter into the view settings window directly.
Select “Views” button to enter into “Views” window.
This monitor provides the following display views:
• General view: meets most monitoring needs;
• Big Font view: displays the important parameters in the big font for remote observation;
• All ECG Trace view: emphasizes on all ECG waveforms;
• NIBP List view: emphasizes on NIBP data;
• RESP-oxy view: emphasizes on SpO
2
and Respiration data;
• Short trends view: displays waveforms and parameters together with recent 2-hours parameter trend graph.
In a View Settings window, “Wave K” means “Waveform Channel No. K”, and “Param K” means “Parameter
Panel No. K” (K=1,2,…7), e.g. “Wave 2” is “Waveform Channel No. 2”, and “Param 3” is “Parameter Panel No. 3”.
5.2.1 General View
When power on the monitor, it enters into the defaulted General View screen. (Please refer to the monitor you
purchased) There are 5 traces of waveform in the left view: waveform for ECG lead III, ECG lead I, ECG lead II,
SpO
2
plethysmogram and Respiration; And there are 5 panels in the right view: ECG, SpO
2
, NIBP, RESP and
TEMP.
1) Description:
�
General View screen shows data and waveforms of main parameters.
• Generally there are 5 traces of waveform in waveform area. The default first trace is the waveform for ECG
lead II; The second is the waveform for ECG lead III; The third is the waveform for ECG lead I; The forth is
the waveform for SpO
2
plethysmogram; And the fifth is the waveform for Respiration. The user can change
it freely.
• Generally there are 5 parameter panels. The default panel order from up to down is: HR, TEMP, NIBP, SpO
2
,
RESP (or CO
2
) and CSM and so on.
2) General View Settings:
�
Waveform Settings:
Settings of waveform channels and parameter panels can be changed easily. Wave 1 , Wave 2 and Wave 3 can
be set as any ECG lead, or turn off this channel directly.
If “3-lead wires” is selected, it is nonadjustable and fixed to be the current displayed cascaded waveform, it
can be set by Menu

ECG

Lead to change the current displayed ECG waveform (we will not cover it again).
The default is “ECG II”.
Note: if “3-lead wires” is selected, then in all view settings (including general view, big font view, all ECG trace
view, NIBP list view and so on), the user can only be set it as the current displayed ECG waveform (that’s
“ECGII”, “ECGI” and “ECGIII”).
If check box “Cascaded above” is checked, Wave 1, Wave 2 and Wave 3 will display the same signal channel
as the trace in a cascaded way.
Wave 4 and Wave 5
can be set as “OFF”, “SpO
2
”, “RESP”, “CO
2
” and “CSM”.