Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 79 / 674

Main Menu Web-Based Management Interface
Lan Switch and Router Blade
79
LAG. The possible values are:
Enable - spanning tree is enabled for this port.
Disable - spanning tree is disabled for this port.
Forwarding State
- The port's current state Spanning Tree state. This state controls what
action a port takes on receipt of a frame. If the bridge detects a malfunctioning port it will
place that port into the broken state. The other five states are defined in IEEE 802.1D:
Disabled
Blocking
Listening
Learning
Forwarding
Broken
Port Role
- Each MST Bridge Port that is enabled is assigned a Port Role for each
spanning tree. The port role will be one of the following values: Root Port, Designated Port,
Alternate Port, Backup Port, Master Port, or Disabled Port.
Admin Mode
- The Port control administration state. The port must be enabled in order for
it to be allowed into the network. The factory default is enabled.
LACP Mode
- Indicates the Link Aggregation Control Protocol administration state. The
mode must be enabled in order for the port to participate in Link Aggregation.
Physical Mode
- Indicates the port speed and duplex mode. In auto-negotiation mode the
duplex mode and speed are set from the auto-negotiation process.
Physical Status
- Indicates the port speed and duplex mode.
Link Status
- Indicates whether the Link is up or down.
Link Trap
- Indicates whether or not the port will send a trap when link status changes.
ifIndex
- Indicates the ifIndex of the interface table entry associated with this port.
Flow Control
- Indicates the status of flow control on this port.
Packet Burst
- Indicates the packet burst used in the rate limit function if the rate limit
admin mode is enabled.
Broadcast Storm Control
- Indicates the status of the broadcast storm control, disable or
Level 1, Level 2, Level 3, Level 4.
Multicast Storm Control
- Indicates the status of the multicast storm control, disable or
Level 1, Level 2, Level 3, Level 4.
Unicast Storm Control
- Indicates the status of the unicast storm control, disable or Level
1, Level 2, Level 3, Level 4.
Capability
- Indicates the port capabilities during auto-negotiation.
Command Buttons
Refresh
– Refresh the configuration value again.