Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 329 / 674

Device Configuration Commands Command Reference
Lan Switch and Router Blade
329
specification is 1 centisecond (0.01 seconds).
LeaveAll Timer:
This Leave All Time controls how frequently LeaveAll PDUs are generated.
A LeaveAll PDU indicates that all registrations will shortly be deregistered. Participants will
need to rejoin in order to maintain registration. There is an instance of this timer on a
per-Port, per-GARP participant basis. The Leave All Period Timer is set to a random value in
the range of LeaveAll- Time to 1.5*LeaveAllTime. Permissible values are 200 to 6000
centiseconds (2 to 60 seconds). The factory default is 1000 centiseconds (10 seconds). The
finest granularity of specification is 1 centisecond (0.01 seconds).
Port GMRP Mode:
Indicates the GMRP administrative mode for the port. It may be enabled
or disabled. If this parameter is disabled, Join Time, Leave Time, and Leave All Time have
no effect. The factory default is disabled.
7.4.4.4 show garp configuration
This command displays GMRP and GVRP configuration information for one or all interfaces.
Syntax
show garp configuration {<slot/port> | all}
<slot/port> -
An interface number.
all -
All interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface:
This displays the slot/port of the interface that this row in the table describes.
GVRP Mode:
Indicates the GVRP administrative mode for the port. It may be enabled or
disabled. If this parameter is disabled, Join Time, Leave Time, and Leave All Time have no
effect. The factory default is disabled.
GMRP Mode:
Indicates the GMRP administrative mode for the port. It may be enabled or
disabled. If this parameter is disabled, Join Time, Leave Time, and Leave All Time have no
effect. The factory default is disabled.
7.4.4.5 bridge-ext gvrp
This command enables GVRP.