Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 267 / 674

Main Menu Web-Based Management Interface
Lan Switch and Router Blade
267
Interface
- This parameter shows the interface on which multicast packets are forwarded.
Group Compatibility Mode
- This parameter shows group compatibility mode (v1, v2 and
v3) for this group on the specified interface.
Source Filter Mode
- The source filter mode (Include/Exclude/NA) for the specified group
on this interface.
Source Hosts
- This parameter shows source addresses which are members of this
multicast address.
Expiry Time
- This parameter shows expiry time interval against each source address
which are members of this multicast group. This is the amount of time after which the
specified source entry is aged out.
6.2.6.3 Defining Multicast Configuration
6.2.6.3.1. Configuring Multicast Global Configuration Page
Selection Criteria
Admin Mode
- Select enable or disable to set the administrative status of Multicast
Forwarding in the router. The default is disabled.
Non-Configurable Data
Protocol State
- The operational state of the multicast forwarding module.
Table Maximum Entry Count
- The maximum number of entries in the IP Multicast
routing table.
Number Of Packets For Which Source Not Found
- The number of multicast packets
that were supposed to be routed but which failed the RPF check.
Number Of Packets For Which Group Not Found
- The number of multicast packets
that were supposed to be routed but for which no multicast route was found.
Protocol
- The multicast routing protocol presently activated on the router, if any.
Table Entry Count
- The number of multicast route entries currently present in the
Multicast route table.
Table Highest Entry Count
- The highest number of multicast route entries that have
been present in the Multicast route table.
Command Buttons