Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 638 / 674

Multicast Commands Command Reference
Lan Switch and Router Blade
638
no ip mcast boundary <groupipaddr> <mask>
< groupipaddr > -
the multicast group address for the start of the range of addresses to
be excluded. The address must be in the range of 239.0.0.0 through 239.255.255.255.
< mask > -
mask to be applied to the multicast group address.
no -
This command deletes an administrative scope multicast boundary specified by
<groupipaddr> and <mask> for which this multicast administrative boundary is applicable.
<groupipaddr> is a group IP address and <mask> is a group IP mask.
Default Setting
None
Command Mode
Interface Config
7.29.2.5 ip multicast ttl-threshold
This command applies the given <ttlthreshold
>
to a routing interface. The <ttlthreshold
>
is the
TTL threshold which is to be applied to the multicast Data packets which are to be forwarded
from the interface
.
The value for <ttlthreshold
>
has range from 0 to 255.
Syntax
ip multicast ttl-threshold <0 - 255>
no ip multicast ttl-threshold
< 0 - 255 > -
the TTL threshold.
no -
This command applies the default <ttlthreshold
>
to a routing interface. The
<ttlthreshold
>
is the TTL threshold which is to be applied to the multicast Data packets
which are to be forwarded from the interface
.
Default Setting
1
Command Mode
Interface Config
7.29.2.6 mrinfo