Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 595 / 674

Routing Information Protocol (RIP) Commands Command Reference
Lan Switch and Router Blade
595
Default Setting
None
Command Mode
Privileged Exec
Display Message
RIP Admin Mode:
Select enable or disable from the pulldown menu. If you select enable
RIP will be enabled for the switch. The default is disabled.
Split Horizon Mode:
Select none, simple or poison reverse from the pulldown menu. Split
horizon is a technique for avoiding problems caused by including routes in updates sent to
the router from which the route was originally learned. The options are: None - no special
processing for this case. Simple - a route will not be included in updates sent to the router
from which it was learned. Poisoned reverse - a route will be included in updates sent to the
router from which it was learned, but the metric will be set to infinity. The default is simple
Auto Summary Mode:
Select enable or disable from the pulldown menu. If you select
enable groups of adjacent routes will be summarized into single entries, in order to reduce
the total number of entries. The default is enabled.
Host Routes Accept Mode:
Select enable or disable from the pulldown menu. If you select
enable the router will be accept host routes. The default is enabled.
Global Route Changes:
The number of route changes made to the IP Route Database by
RIP. This does not include the refresh of a route's age.
Global queries:
The number of responses sent to RIP queries from other systems. Default
Metric Sets a default for the metric of redistributed routes. This field displays the default
metric if one has already been set or blank if not configured earlier. The valid values are (1 to
15).
Default Metric:
Sets a default for the metric of redistributed routes. This field displays the
default metric if one has already been set or blank if not configured earlier. The valid values
are (1 to 15).
Default Route Advertise:
The default route.
7.23.1.2 show ip rip interface
This command displays information related to a particular RIP interface.
Syntax
show ip rip interface <slot/port>
< slot/port > -
Interface number
Default Setting
None
Command Mode