Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 665 / 674

Default Settings
Lan Switch and Router Blade
665
9.2
The default settings for all the configuration commands are shown in the following
table.
SB9 DEFAULT CONFIG
configure mode
sntp
sntp unicast client poll-interval 6
sntp unicast client poll-timeout 5
sntp unicast client poll-retry 1
sntp broadcast client poll-interval 6
sntp client port 123
sntp clock timezone Taipei 8 0 before-utc
logging buffered logging buffered
logging buffered wrap
no logging console
no logging syslog
no logging syslog port
bridge-ext no bridge-ext gmrp
no bridge-ext gvrp
ip ip javamode
ip dhcp client-identifier text Default
(system clear config : ip dhcp client-identifier hex <MAC
address>)
no ip domain-lookup
no ip http secure-server
ip http secure-protocol TLS1 SSL3
ip http secure-port 443
ip http server
no ip ssh
ip ssh maxsessions 5
ip ssh timeout 5
no ip routing
ip route precedence 1
ip forwarding
no ip igmp snooping
no ip dvmrp
no ip igmp
no ip pimdm
no ip pimsm
ip pimsm spt-threshold 50
ip pimsm message-interval 60
ip pimsm register-rate-limit 50
no ip multicast
no ip vrrp