Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 101 / 674

Main Menu Web-Based Management Interface
Lan Switch and Router Blade
101
Copy to File
- Send the updated screen to the switch perform the file copy.
6.2.1.9.10. Defining Ping Function Page
Use this screen to tell the switch to send a Ping request to a specified IP address. You can use
this to check whether the switch can communicate with a particular IP station. Once you click
the Submit button, the switch will send three pings and the results will be displayed below the
configurable data. If a reply to the ping is not received, you will see
No Reply Received from
IP xxx.xxx.xxx.xxx
, otherwise you will see
Reply received from IP xxx.xxx.xxx.xxx : (send
count = 5, receive count = n).
Configurable Data
IP Address
- Enter the IP address of the station you want the switch to ping. The initial
value is blank. The IP Address you enter is not retained across a power cycle.
Command Buttons
Submit
- This will initiate the ping.
6.2.1.9.11. Managing CDP Function
Defining CDP Configuration Page
Use this menu to configure the parameters for CDP, which is used to discover a CISCO
device on the LAN.
Configurable Data
Admin Mode
- CDP administration mode which are Enable and Disable.
Hold Time
- the legal time period of a received CDP packet.