Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 507 / 674

Differentiated Service Command Command Reference
Lan Switch and Router Blade
507
Note:
This command does not validate the protocol number value against the current list
defined by IANA.
Default
None
Command Mode
Class-Map Config
7.15.2.13 match srcip
This command adds to the specified class definition a match condition based on the source IP
address of a packet.
Syntax
match srcip <ipaddr> <ipmask
>
<ipaddr>
specifies an IP address.
<
ipmask>
specifies an IP address bit mask; note that although it resembles a standard
subnet mask, this bit mask need not be contiguous.
Default
None
Command Mode
Class-Map Config
7.15.2.14 match srcl4port
This command adds to the specified class definition a match condition based on the source
layer 4 port of a packet using a single keyword or numeric notation or a numeric range notation.
Syntax
match srcl4port {<portkey> | <0-65535>}
<portkey>
is one of the supported port name keywords (listed below).
The currently supported <portkey> values are: domain, echo, ftp, ftpdata, http, smtp, snmp,
telnet, tftp, www. Each of these translates into its equivalent port number, which is used as
both the start and end of a port range.