manualshive.com logo in svg

Fujitsu Siemens Computers PRIMERGY BX, Description

Share
Download
Page 520
Fujitsu Siemens Computers PRIMERGY BX Description Download Page 520

Differentiated Service Command                                           Command Reference   

Lan Switch and Router Blade

 

520 

 Privileged EXEC  

Display Message 

 

DiffServ Admin Mode 

The current setting of the DiffServ administrative mode. An attached 

policy is only in effect on an interface while DiffServ is in an enabled mode. 
 

Interface 

The slot number and port number of the interface (slot/port). 

 

Direction 

The traffic direction of this interface service. 

 

Operational Status 

The current operational status of this DiffServ service interface. 

 

Policy Name 

The name of the policy attached to the interface in the indicated direction. 

 

Policy Details 

Attached policy details, whose content is identical to that described for the show 

policy-map <policymapname> command (content not repeated here for brevity). 
 

 

7.15.5.5  show diffserv service brief 

 

This command displays all interfaces in the system to which a DiffServ policy has been 
attached. The direction parameter is optional; if specified, only services in the indicated 
direction are shown. 
 

Syntax 

 

show diffserv service brief [ in ]   

Default Setting 

None 

Command Mode 

 Privileged EXEC  

Display Message 

 
DiffServ Admin Mode 

The current setting of the DiffServ administrative mode. An attached 

policy is only active on an interface while DiffServ is in an enabled mode. 
 

The following information is repeated for interface and direction (only those 
interfaces configured with an attached policy are shown): 
 
Interface 

The slot number and port number of the interface (slot/port). 

 

Direction 

The traffic direction of this interface service. 

 

OperStatus 

The current operational status of this DiffServ service interface. 

 

Policy Name 

The name of the policy attached to the interface in the indicated direction. 

 

Summary of Contents for PRIMERGY BX



































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands