Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 296 / 674

Device Configuration Commands Command Reference
Lan Switch and Router Blade
296
The display parameters when the argument is 'all' are as follows:
Interface:
The physical slot and physical port or the logical slot and logical port.
Summary:
The summation of the statistics of all ports.
Packets Received Without Error:
The total number of packets (including broadcast
packets and multicast packets) received.
Packets Received With Error:
The number of inbound packets that contained errors
preventing them from being deliverable to a higher-layer protocol.
Broadcast Packets Received:
The total number of packets received that were directed to
the broadcast address. Note that this does not include multicast packets.
Packets Transmitted Without Error:
The total number of packets transmitted.
Transmit Packets Errors:
The number of outbound packets that could not be transmitted
because of errors.
Collisions Frames:
The best estimate of the total number of collisions on this Ethernet
segment.
This command displays detailed statistics for a specific port or for all CPU traffic based upon
the argument.
Syntax
show interface counters detailed {<slot/port> | switchport}
<slot/port> -
is the desired interface number.
switchport -
This parameter specifies whole switch or all interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
The display parameters when the argument is ' <slot/port>' are as follows:
Total Packets Received (Octets):
The total number of octets of data (including those in
bad packets) received on the network (excluding framing bits but including FCS octets).
This object can be used as a reasonable estimate of Ethernet utilization. If greater
precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled
before and after a common interval. The result of this equation is the value Utilization
which is the percent utilization of the Ethernet segment on a scale of 0 to 100 percent.
Packets Received 64 Octets:
The total number of packets (including bad packets)
received that were 64 octets in length (excluding framing bits but including FCS octets).
Packets Received 65-127 Octets:
The total number of packets (including bad packets)
received that were between 65 and 127 octets in length inclusive (excluding framing bits
but including FCS octets).