Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 603 / 674

Routing Information Protocol (RIP) Commands Command Reference
Lan Switch and Router Blade
603
Default Setting
None
Command Mode
Interface Config
7.23.2.12 ip rip receive version
This command configures the interface to allow RIP control packets of the specified version(s)
to be received.
The value for <mode> is one of:
rip1
to receive only RIP version 1 formatted packets,
rip2
for
RIP version 2,
both
to receive packets from either format, or
none
to not allow any RIP control
packets to be received
Syntax
ip rip receive version {rip1 | rip2 | both | none}
no ip rip receive version
no -
This command configures the interface to allow RIP control packets of the default
version(s) to be received.
Default Setting
Both
Command Mode
Interface Config
7.23.2.13 ip rip send version
This command configures the interface to allow RIP control packets of the specified version to
be sent.
The value for <mode> is one of:
rip1
to broadcast RIP version 1 formatted packets,
rip1c
(RIP
version 1 compatibility mode) which sends RIP version 2 formatted packets via broadcast,
rip2
for sending RIP version 2 using multicast, or
none
to not allow any RIP control packets to be
sent.