Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 318 / 674

Device Configuration Commands Command Reference
Lan Switch and Router Blade
318
Command Mode
Interface Config
This command sets the frame acceptance mode for all interfaces. For VLAN Only mode,
untagged frames or priority frames received on this interface are discarded. For Admit All mode,
untagged frames or priority frames received on this interface are accepted and assigned the
value of the interface VLAN ID for this port. With either option, VLAN tagged frames are
forwarded in accordance with the IEEE 802.1Q VLAN Specification.
Syntax
switchport acceptable-frame-type all {tagged | all}
no switchport acceptable-frame-type all {tagged | all}
tagged -
VLAN only mode.
all –
One is for Admit all mode. The other one is for all interfaces.
no -
This command sets the frame acceptance mode for all interfaces to
Admit All
. For
Admit All mode, untagged frames or priority frames received on this interface are accepted
and assigned the value of the interface VLAN ID for this port. With either option, VLAN
tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.
Default Setting
Admit all
Command Mode
Global Config
7.4.3.11 switchport ingress-filtering
This command enables ingress filtering. If ingress filtering is disabled, frames received with
VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and
forwarded to ports that are members of that VLAN.
Syntax
switchport ingress-filtering
no switchport ingress-filtering
no -
This command disables ingress filtering. If ingress filtering is disabled, frames