Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 327 / 674

Device Configuration Commands Command Reference
Lan Switch and Router Blade
327
show bridge-ext
Default Setting
None
Command Mode
Privileged Exec
Display Message
GMRP Admin Mode:
This displays the administrative mode of GARP Multicast Registration
Protocol (GMRP) for the system.
GVRP Admin Mode:
This displays the administrative mode of GARP VLAN Registration
Protocol (GVRP) for the system.
7.4.4.2 show gvrp configuration
This command displays Generic Attributes Registration Protocol (GARP) information for one or
all interfaces.
Syntax
show gvrp configuration {<slot/port> | all}
<slot/port> -
An interface number.
all -
All interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface:
This displays the slot/port of the interface that this row in the table describes.
Join Timer:
Specifies the interval between the transmission of GARP PDUs registering (or
re-registering) membership for an attribute. Current attributes are a VLAN or multicast group.
There is an instance of this timer on a per-Port, per-GARP participant basis. Permissible
values are 10 to 100 centiseconds (0.1 to 1.0 seconds). The factory default is 20
centiseconds (0.2 seconds). The finest granularity of specification is 1 centisecond (0.01
seconds).
Leave Timer:
Specifies the period of time to wait after receiving an unregister request for an
attribute before deleting the attribute. Current attributes are a VLAN or multicast group. This
may be considered a buffer time for another station to assert registration for the same
attribute in order to maintain uninterrupted service. There is an instance of this timer on a