Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 294 / 674

Device Configuration Commands Command Reference
Lan Switch and Router Blade
294
User Name:
The name the user will use to login using the serial port or Telnet. A new user
may be added to the switch by entering a name in a blank entry. The user name may be up
to 8 characters, and is not case sensitive. Two users are included as the factory default,
admin, and guest.
Connection From:
IP address of the telnet client machine or EIA-232 for the serial port
connection.
Idle Time:
Time this session has been idle.
Session Time:
Total time this session has been connected.
Session Type:
Shows the type of session: telnet, serial or SSH.
7.4 Device Configuration Commands
7.4.1 Interface
7.4.1.1 show interface status
This command displays the Port monitoring information for the system.
Syntax
show interface status {<slot/port> | all}
<slot/port> -
is the desired interface number.
all -
This parameter displays information for all interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Intf:
The physical slot and physical port.
Type:
If not blank, this field indicates that this port is a special type of port. The possible
values are:
Source
- This port is a monitoring port.
PC Mbr
- This port is a member of a port-channel (LAG).
Dest
- This port is a probe port.
Admin Mode:
Selects the Port control administration state. The port must be enabled in
order for it to be allowed into the network. – It may be enabled or disabled. The factory
default is enabled.
Physical Mode:
Selects the desired port speed and duplex mode. If auto-negotiation
support is selected, then the duplex mode and speed will be set from the auto-negotiation