Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 579 / 674

Open Shortest Path First (OSPF) Commands Command Reference
Lan Switch and Router Blade
579
Syntax
ip ospf cost <1-65535>
no ip ospf cost
< 1-65535 > -
The range of the cost is 1 to 65535.
<no> -
This command configures the default cost on an OSPF interface.
Default Setting
The default cost value is 10.
Command Mode
Interface Config
7.20.2.29 ip ospf dead-interval
This command sets the OSPF dead interval for the specified interface.
Syntax
ip ospf dead-interval <1-2147483647>
no ip ospf dead-interval
< 1-2147483647> -
It is a valid positive integer, which represents the length of time in
seconds that a router's Hello packets have not been seen before its neighbor routers
declare that the router is down. The value for the length of time must be the same for all
routers attached to a common network. This value should be some multiple of the Hello
Interval (i.e. 4).
<no> -
This command sets the default OSPF dead interval for the specified interface.
Default Setting
The default dead interval is 40 seconds.
Command Mode
Interface Config