Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 44 / 674

Overview Configuration the Switch Blade Module
Lan Switch and Router Blade
44
5 Configuration the Switch Blade Module
This section contains information about Ethernet Switch Module unpacking, installation, and
cable connections.
5.1 Overview
The Ethernet Switch Module is inserted in the PRIMERGY BX Blade Server which is a modular
server system that can integrates up to 10 processor blades and four Ethernet Switch Modules.
Package Contents
While unpacking the Ethernet Switch Module, ensure that the following items are included:
• The Ethernet Switch Module
• Documentation CD
Unpacking the Ethernet Switch Module
To unpack the Ethernet Switch Module:
NOTE:
Before unpacking the Ethernet Switch Module, inspect the package and report any
evidence of damage immediately.
NOTE:
An ESD strap is not provided, however it is recommended to wear one for the following
procedure.
1 Open the container.
2 Carefully remove the Ethernet Switch Module from the container and place it on a secure and
clean surface.
3 Remove all packing material.
4 Inspect the Ethernet Switch Module for damage. Report any damage immediately.
NOTE:
The illustrations in this document might differ slightly from actual switch blade and
chassis.