Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 349 / 674

Device Configuration Commands Command Reference
Lan Switch and Router Blade
349
Default Setting
None
Command Mode
Privileged Exec
Display Message
Log. Intf:
The logical slot and the logical port.
Port-Channel Name:
The name of this port-channel (LAG). You may enter any string of up
to 15 alphanumeric characters.
Link :
Indicates whether the Link is up or down.
Admin Mode:
May be enabled or disabled. The factory default is enabled.
Link Trap Mode:
This object determines whether or not to send a trap when link status
changes. The factory default is enabled.
STP Mode:
The Spanning Tree Protocol Administrative Mode associated with the port or
port channel (LAG). The possible values are:
Disable:
Spanning tree is disabled for this port.
Enable:
Spanning tree is enabled for this port. (Default Value)
Mbr Ports:
A listing of the ports that are members of this port-channel (LAG), in slot/port
notation. There can be a maximum of eight ports assigned to a given port-channel (LAG).
Port Speed:
Speed of the port-channel port.
Type:
This field displays the status designating whether a particular port-channel (LAG) is
statically or dynamically maintained. The possible values of this field are Static, indicating
that the port-channel is statically maintained; and Dynamic, indicating that the port-channel
is dynamically maintained.
Port Active:
This field lists the ports that are actively participating in the port-channel (LAG).
7.4.6.2 port-channel
This command configures a new port-channel (LAG) and generates a logical slot and port
number for it. Display this number using the
show port-channel.
Note:
Before including a port in a port-channel, set the port physical mode. See
speed
command.
Syntax
port-channel <name>
no port-channel {<logical slot/port> | all}
<logical slot/port> -
Port-Channel Interface number.
<name> -
Port-Channel name (up to 15 alphanumeric characters).
all -
all Port-Channel interfaces.
no -
This command removes that Port-Channel.