Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 325 / 674

Device Configuration Commands Command Reference
Lan Switch and Router Blade
325
This command adds all physical interfaces to the protocol-based VLAN identified by
<
group-name>
. A group may have more than one interface associated with it. Each interface
and protocol combination can only be associated with one group. If adding an interface to a
group causes any conflicts with protocols currently associated with the group, this command
will fail, and the interface(s) will not be added to the group.
Syntax
switchport protocol group all <group-name>
no switchport protocol group all <group-name>
<group-name> -
a VLAN Group Name (a character string of 1 to 16 characters).
all -
All interfaces.
no -
This command removes all interfaces from this protocol-based VLAN group that is
identified by this <group-name>.
Default Setting
None
Command Mode
Global Config
This command adds the <protocol> to the protocol-based VLAN identified by <group-name>. A
group may have more than one protocol associated with it. Each interface and protocol
combination can only be associated with one group. If adding a protocol to a group causes any
conflicts with interfaces currently associated with the group, this command will fail, and the
protocol will not be added to the group. The possible values for protocol are
ip, arp,
and
ipx
.
Syntax
switchport protocol group add protocol <group-name> {ip | arp | ipx}
no switchport protocol group add protocol <group-name> {ip | arp | ipx}
<group-name> -
a VLAN Group Name (a character string of 1 to 16 characters).
ip -
IP protocol.
arp -
ARP protocol.
ipx -
IPX protocol.
no -
This command removes the <
protocol>
from this protocol-based VLAN group that is