Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 647 / 674

Protocol Independent Multicast – Sparse Mode (PIM-SM) Commands Command Reference
Lan Switch and Router Blade
647
Default Setting
None
Command Mode
Privileged Exec
Display Message
Slot/port:
Valid slot and port number separated by forward slashes.
IP Address:
This field indicates the IP address of the specified interface.
Subnet Mask:
This field indicates the Subnet Mask for the IP address of the PIM interface.
Mode:
This field indicates whether PIM-SM is enabled or disabled on the specified interface.
This is a configured value. By default it is disabled.
Hello Interval:
This field indicates the frequency at which PIM hello messages are
transmitted on this interface. This is a configured value. By default, the value is 30 seconds.
CBSR Preference:
This field shows the preference value for the local interface as a
candidate bootstrap router. This is a configured value.
CRP Preference:
This field shows the preference value as a candidate rendezvous point on
this interface.
CBSR Hash Mask Length:
This field shows the hash mask length to be advertised in
bootstrap messages if this interface is elected as the bootstrap router. The value is used in
the hash algorithm for selecting the RP for a particular group.
7.31.1.4 show ip pimsm interface stats
This command displays the statistical information for PIM-SM on the specified interface.
Syntax
show ip pimsm interface stats {<slot/port> | all}
< slot/port > -
Interface number.
all -
this command represents all interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface:
Valid slot and port number separated by forward slashes.
IP Address:
This field indicates the IP Address that represents the PIM-SM interface.
Subnet Mask:
This field indicates the Subnet Mask of this PIM-SM interface.
Designated Router:
This indicates the IP Address of the Designated Router for this