Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 278 / 674

Main Menu Web-Based Management Interface
Lan Switch and Router Blade
278
Hello Interval
- The frequency at which PIM hello messages are transmitted on the
selected interface.
IP Address
- The IP address of the selected interface.
Neighbor Count
- The number of PIM neighbors on the selected interface.
Designated Router
- The designated router on the selected PIM interface. For point-
to-point interfaces, this will be 0.0.0.0.
Neighbor IP
- The IP address of the PIM neighbor for which this entry contains
information.
Uptime
- The time since this PIM neighbor (last) became a neighbor of the local router.
Expiry Time
- The minimum time remaining before this PIM neighbor will be aged out.
Command Buttons
Refresh
- Refresh the data on the screen with the present state of the data in the router.
6.2.6.6 Managing PIM-SM Protocol
6.2.6.6.1. Configuring PIM-SM Global Configuration Page
Configurable Data
Admin Mode
- Select enable or disable from the pulldown menu to set the administrative
status of PIM-SM in the router. You must enable IGMP before enabling PIM-SM. The
default is disabled.
Join/Prune Interval
- Enter the interval between the transmission of PIM-SM Join/Prune
messages. The valid values are from (10 to 3600 secs). The default value is 60.
Data Threshold Rate
- Enter the minimum source data rate in K bits/second above which