Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 314 / 674

Device Configuration Commands Command Reference
Lan Switch and Router Blade
314
Command Mode
Privileged Exec
Display Message
Group Name:
This field displays the group name of an entry in the Protocol-based VLAN
table.
Group ID:
This field displays the group identifier of the protocol group.
Protocol(s):
This field indicates the type of protocol(s) for this group.
VLAN:
This field indicates the VLAN associated with this Protocol Group.
Interface(s):
This field lists the slot/port interface(s) that are associated with this Protocol
Group.
7.4.3.4 show interface switchport
This command displays VLAN port information.
Syntax
show interface switchport {<slot/port> | all}
<slot/port> -
Interface number.
all –
Display the entire table.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Slot/port:
Indicates by slot id and port number which port is controlled by the fields on this
line. It is possible to set the parameters for all ports by using the selectors on the top line.
Port VLAN ID:
The VLAN ID that this port will assign to untagged frames or priority tagged
frames received on this port. The value must be for an existing VLAN. The factory default is
1.
Acceptable Frame Types:
Specifies the types of frames that may be received on this port.
The options are 'VLAN only' and 'Admit All'. When set to 'VLAN only', untagged frames or
priority tagged frames received on this port are discarded. When set to 'Admit All', untagged
frames or priority tagged frames received on this port are accepted and assigned the value
of the Port VLAN ID for this port. With either option, VLAN tagged frames are forwarded in
accordance to the 802.1Q VLAN specification.
Ingress Filtering:
May be enabled or disabled. When enabled, the frame is discarded if this
port is not a member of the VLAN with which this frame is associated. In a tagged frame, the
VLAN is identified by the VLAN ID in the tag. In an untagged frame, the VLAN is the Port
VLAN ID specified for the port that received this frame. When disabled, all frames are
forwarded in accordance with the 802.1Q VLAN bridge specification. The factory default is
disabled.