Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 201 / 674

Main Menu Web-Based Management Interface
Lan Switch and Router Blade
201
ƒ
OSPF Type-2
ƒ
RIP
ƒ
BGP4
Next Hop Slot/port
- The outgoing router interface to use when forwarding traffic to the
destination.
Next Hop IP Address
- The outgoing router IP address to use when forwarding traffic to
the next router (if any) in the path towards the destination. The next router will always be
one of the adjacent neighbors or the IP address of the local interface for a directly
attached network.
Total Number of Routes
- The total number of routes in the route table.
Command Buttons
Refresh
- Refresh the data on the screen with the present state of the data in the switch.
6.2.3.8.3. Configuring Router Static Route Entry
Selection Criteria
Network Address
- Specifies the IP route prefix for the destination. In order to create a
route a valid routing interface must exist and the next hop IP Address must be on the
same network as the routing interface. Routing interfaces are created on the IP Interface
Configuration page. Valid next hop IP Addresses can be viewed on the 'Route Table'
screen.
Route Type
- This field can be either default or static. If creating a default route, all that
needs to be specified is the next hop IP address, otherwise each field needs to be
specified.
Non-Configurable Data
Subnet Mask
- Also referred to as the subnet/network mask, this indicates the portion of
the IP interface address that identifies the attached network.