Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 627 / 674

Internet Group Management Protocol (IGMP) Commands
Command Reference
Lan Switch and Router Blade
627
no ip igmp query-max-response-time
<0-255> -
The range for <0-255
>
is 0 to 255 tenths of a second.
no -
This command resets the maximum response time interval for the specified interface,
which is the maximum query response time advertised in IGMPv2 queries on this
interface to the default value. The maximum response time interval is reset to the default
time.
Default Setting
100
Command Mode
Interface Config
7.28.2.7 ip igmp robustness
This command configures the robustness that allows tuning of the interface. The robustness is
the tuning for the expected packet loss on a subnet. If a subnet is expected to have a lot of loss,
the Robustness variable may be increased for the interface.
Syntax
ip igmp robustness <1-255>
no ip igmp robustness
<1-255> -
The range for <1-255
>
is 1 to 255.
no -
This command sets the robustness value to default.
Default Setting
2
Command Mode
Interface Config
7.28.2.8 ip igmp startup-query-count
This command sets the number of Queries sent out on startup, separated by the Startup Query
Interval on the interface.