Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 313 / 674

Device Configuration Commands Command Reference
Lan Switch and Router Blade
313
Display Message
VLAN ID:
There is a VLAN Identifier (VID) associated with each VLAN. The range of the
VLAN ID is 1 to 3965.
VLAN Name:
A string associated with this VLAN as a convenience. It can be up to 16
alphanumeric characters, including blanks. The default is blank. VLAN ID 1 is always named
`Default`. This field is optional.
VLAN Type:
Type of VLAN, which can be Default, (VLAN ID = 1), can be static (one that is
configured and permanently defined), or Dynamic (one that is created by GVRP registration).
Slot/port:
Indicates by slot id and port number which port is controlled by the fields on this
line.
It is possible to set the parameters for all ports by using the selectors on the top line.
Current:
Determines the degree of participation of this port in this VLAN. The permissible
values are:
Include:
This port is always a member of this VLAN. This is equivalent to registration fixed
in the IEEE 802.1Q standard.
Exclude:
This port is never a member of this VLAN. This is equivalent to registration
forbidden in the IEEE 802.1Q standard.
Autodetect:
Specifies to allow the port to be dynamically registered in this VLAN via
GVRP. The port will not participate in this VLAN unless a join request is received on this
port. This is equivalent to registration normal in the IEEE 802.1Q standard.
Configured:
Determines the configured degree of participation of this port in this VLAN. The
permissible values are:
Include:
This port is always a member of this VLAN. This is equivalent to registration fixed
in the IEEE 802.1Q standard.
Exclude:
This port is never a member of this VLAN. This is equivalent to registration
forbidden in the IEEE 802.1Q standard.
Autodetect:
Specifies to allow the port to be dynamically registered in this VLAN via
GVRP. The port will not participate in this VLAN unless a join request is received on this
port. This is equivalent to registration normal in the IEEE 802.1Q standard.
Tagging:
Select the tagging behavior for this port in this VLAN.
Tagged:
Specifies to transmit traffic for this VLAN as tagged frames.
Untagged:
Specifies to transmit traffic for this VLAN as untagged frames.
7.4.3.3 show protocol group
This command displays the Protocol-Based VLAN information for either the entire system, or
for the indicated Group.
Syntax
show protocol group {<group-name> | all}
<group-name> -
The group name of an entry in the Protocol-based VLAN table.
all –
Displays the entire table.
Default Setting
None