Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 272 / 674

Main Menu Web-Based Management Interface
Lan Switch and Router Blade
272
6.2.6.3.7. Viewing Multicast Admin Boundary Configuration Page
Non-Configurable Data
Slot/port
- The router interface to which the administratively scoped address range is
applied.
Group IP
- The multicast group address for the start of the range of addresses to be
excluded.
Group Mask
- The mask that is applied to the multicast group address. The combination
of the mask and the Group IP gives the range of administratively scoped addresses for the
selected interface.
Command Buttons
Refresh
- Refresh the data on the screen with the present state of the data in the router.
6.2.6.4 Configuring Multicast Mdebug
6.2.6.4.1. Configuring Mrinfo Run Page
Use this screen to initiate an
mrinfo
command. You can use the
mrinfo
command to find out
information about neighboring multicast routers. While you initiate the query using this screen,
the results are displayed on the Mrinfo Show screen.
Configurable Data
Router Interface
- Enter the IP address of the router interface for which you want to see
the neighbor router information. If you do not enter an address the router will query itself.
Command Buttons
Submit
- Initiate the
mrinfo
command on the router. If the
mrinfo
command completes
successfully the browser will display the Mrinfo Show screen. If the
mrinfo
command fails,
you will see the Mrinfo Run screen again.