Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 600 / 674

Routing Information Protocol (RIP) Commands Command Reference
Lan Switch and Router Blade
600
Command Mode
Router RIP Config
7.23.2.7 hostrouteaccept
This command enables the RIP hostroutesaccept mode.
Syntax
hostrouteaccept
no hostrouteaccept
no -
This command disables the RIP hostroutesaccept mode.
Default Setting
Enable
Command Mode
Router RIP Config
7.23.2.8 split-horizon
This command sets the RIP split horizon mode.
None mode
will not use RIP split horizon
mode.
Simple mode
will be that a route is not advertised on the interface over which it is
learned.
Poison mode
will be that routes learned over this interface should be re-advertised
on the interface with a metric of infinity (16).
Syntax
split-horizon {none | simple | poison}
no split-horizon
none -
This command sets without using RIP split horizon mode.
simple -
This command sets to use simple split horizon mode.
poison -
This command sets to use poison reverse mode.
no -
This command cancel to set the RIP split horizon mode and sets none mode.