Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 548 / 674

IP Routing Commands Command Reference
Lan Switch and Router Blade
548
This command displays the entire route table.
Syntax
show ip route
Default Setting
None
Command Mode
Privileged Exec
Display Message
Total Number of Routes:
The total number of routes.
for each next hop
Network Address:
Is an IP address identifying the network on the specified interface.
Subnet Mask:
Is a mask of the network and host portion of the IP address for the router
interface.
Protocol:
Tells which protocol added the specified route. The possibilities are: local, static,
OSPF, or RIP
Next Hop Intf:
The outgoing router interface to use when forwarding traffic to the next
destination.
Next Hop IP Address:
The outgoing router IP address to use when forwarding traffic to the
next router (if any) in the path toward the destination.
7.19.1.5 show ip route bestroutes
This command displays router route table information for the best routes.
Syntax
show ip route bestroutes
Default Setting
None
Command Mode
Privileged Exec
Display Message
Total Number of Routes:
The total number of routes.
Network Address:
Is an IP route prefix for the destination.
Subnet Mask:
Is a mask of the network and host portion of the IP address for the router
interface.