Fujitsu Siemens Computers PRIMERGY BX, Description

Page: 310 / 674

Device Configuration Commands Command Reference
Lan Switch and Router Blade
310
<vlanid> -
VLAN ID (Range: 1
–
3965)
all –
This command displays the entire table.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Mac Address:
A unicast MAC address for which the switch has forwarding and/or filtering
information. The format is 6 or 8 two-digit hexadecimal numbers that are separated by
colons, for example 01:23:45:67:89:AB. In an IVL system the MAC address will be displayed
as 8 bytes. In an SVL system, the MAC address will be displayed as 6 bytes.
Note: This
software version only supports IVL systems.
Type:
This displays the type of the entry. Static entries are those that are configured by the
end user. Dynamic entries are added to the table as a result of a learning process or
protocol.
Source:
The component that is responsible for this entry in the Multicast Forwarding
Database. Possible values are IGMP Snooping, GMRP, and Static Filtering.
Description:
The text description of this multicast table entry.
Interfaces:
The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
Forwarding Interfaces:
The resultant forwarding list is derived from combining all the
component’s forwarding interfaces and removing the interfaces that are listed as the static
filtering interfaces.
7.4.2.5 show mac-address-table stats
This command displays the MFDB statistics.
Syntax
show mac-address-table stats
Default Setting
None
Command Mode
Privileged Exec
Display Message
Max MFDB Table Entries:
This displays the total number of entries that can possibly be in
the MFDB.
Most MFDB Entries Since Last Reset:
This displays the largest number of entries that
have been present in the Multicast Forwarding Database table. This value is also known as
the MFDB high-water mark.